Www vintage dating com
LOOK FOR THE LABEL Look for labels in the side seams and hems of older garments. The Coat and Suit Industry National Recovery Board was a trade organization meant to ensure that garments were made in accordance with Fair Labor Standards. The Fur Products labeling act of 1952 required an accurate description of fur (e.g.
Country-of-origin labels came about in the US following the Mc Kinley Act of 1891. The NRA Blue Eagle label, denoting compliance with Manufacturing Codes, was used in the U. what had been called Hudson Seal now had to be identified as sheared muskrat).
The serger has been in use since the 1920s for seam finishing.
This is the overlock or serged finish we still use today on cut fabric edges inside garments.
Loops for hanging found inside the neckline of vintage jackets and blouses are usually of European manufacture.
It's a really handy guide to visually being able to date your compact and you'll be surprised that many aren't as old as you might think.
Cartridge pleating of the skirt at its waist is seen from the 1840s-1860s, fading out by the 1870s.
Tiny piped armhole seams date a garment to the 1870s or before and were rare after that. Three-quarter and seven-eighth length sleeves were popular from the late 1930s through the 1950s. Armholes were cut high and fitted in the 1950s and the 1970s.
Quick Tips for Dating Vintage Here are some quick, easy-to-remember tips. Center-back dress zippers – seen occasionally in the 1940s and early 1950s, but generally later 1950s and 1960s and in most dresses since the 1970s.
They don’t necessarily place a garment in a specific year, but they will help you narrow down the time range. Velcro® was invented in 1948, but not used in clothing much until the 1960s.