Updating bios without floppy drive online dating for the shy

EZ Flash will check the contents of the file to be sure it matches the current system.When the check is complete, it will ask if you wish to go ahead with the update.Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. If you are running the latest development version, please email a report to [email protected] any of the above operations work correctly for you with this flash part. well since i’m only making a backup in this step this really is irrelevant (because i’m only reading) but i also ignored this later on and it worked perfectly. Found chipset "Intel ICH9", enabling flash write... This chipset supports the following protocols: FWH, SPI. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. download the bios file from the manufacturers website and then flash it: flashrom v0.9.3-r1211 on Linux 2.6.35-22-generic (i686), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at delay loop... Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.

But as I’m using Linux and in particular Gentoo, I revised a bit the instructions :) Now just restart your system with the USB drive in it and run the flash utility as provided by your manufacturer.

like i said i ignored the UNTESTED warning and was able to cross-flash my asus p5k-se mainboard to the asus p5kr bios (to receive ahci support for the p5k-se motherboard) without any problems.

Boot Block Recovery from Floppy Disk is a standard feature of the AMIBIOS8 core, andis enabled by default.

When the flash ROM has successfully been programmed, the computerwill reboot.

Please do not interrupt the BIOS flash process until it hasfully completed.

Leave a Reply